Site Wide Free US Shipping

Air Compressor And Air Tools

Even a single misuse and lack of proper preparation of Air Compressors and Air Tools can affect your overall process. This is why every worker should always be constantly reminded to practice safety tips and proper setup when using these tools. Learn more about these practices below. 

Air Compressor and Air Tools Setup Safety Tips

Safety  is crucial and should always be the top priority of everyone in any working environment. Whether you're working on a large worksite, such as factory or construction, or simply completing various tasks at home, practicing safety precautions is necessary. Now, if you are in the business, you need to think of the safety of your employees first over achieving the highest profit goals you want. 

While safety measures are standard, every worker needs to pay further attention when working with an air compressor and air tools. Always remember that compressed air can be dangerous, and even a tiny difference in air pressure required with the ones you feed can affect your work process flow. Now, as we go through the essential safety tips, be reminded of the common hazards you may encounter and why safety precautions are necessary. These hazards include electrical dangers, fumes, high pressure, and noise. That said, you need to secure all air compressor accessories fit for your work requirement, feed the proper air pressure, and set up your air compressor and air tools correctly. 

List of Pre-Operation Checks You Need to Conduct When Using Air Compressor and Air Tools

Before starting your project with an air compressor and air tools, undergoing pre-operation checks is also necessary. There might be a last-minute error that may cause damage to your air tools and process, and your pre-operation check results may help you take action immediately and maintain your system smoothly.

When you start checking, you will need to look at various components that significantly affect your air compressor and air tools' overall performance. It includes oil level, lubrication, fuel level, air filter tool, air connection, outlets, and of course, your air tools. Start by listing out all of these, appropriately scheduled each, and keep everything on track to ensure that you will not miss anything. Ease your pre-operation check tasklist with the simple guide listed below. 

Check the oil level. 

Oil is necessary when working with an air compressor and air tools. Hence, make sure to check your system’s oil level and fill the required amount needed. Operating your air compressor system with no sufficient oil may damage your process and your air tool as a whole. Also, take note not to overfill and spill oil on the reservoir tank. 

Apply proper lubrication.

Another thing to check is the lubrication of your air compressor system. When applying one, make sure to use the recommended lubrication and check it is not flammable before you use it. Proper lubrication helps increase work process efficiency, giving you the best output possible. 

Ensure sufficient fuel level.

Next, ensure your air compressor has a sufficient amount of fuel to start it running. When you use your air compressor with less than the proper fuel level, it would be troublesome to refill it in the middle of your work process. It can also increase your waiting time, which also affects your productivity. 

Check the air filter.

The air filter is a must-have air compressor accessory for your system. Whether you only use it once or more, ensure to check your air filter before starting with your projects. A dirty and unclean air filter can also damage your air compressor’s performance, and clogs may hinder your process flow. Hence, maintain your air filters clean, pure, and in good condition all the time and secure air tool filter regulators for more convenience.

Check the air connection.

Sometimes, workers encounter errors where air compressors won't operate, only to find out that the air connections are not correctly connected. Before starting your air compressor, ensure there is a proper air connection to a power source. Any weak or loose air connection can interrupt your process flow. 

Check the outlets.

Aside from air connection, the outlet itself can affect and damage your air compressor and air tools. Hence, make sure to plug your air compressor on proper grounding to prevent electric damages to your air tools and air compressor. 

Check air tool connections.

Before running your air compressor, make sure your air tools are appropriately connected. As previously mentioned, air compressors and compressed air can be dangerous; thus, you need to secure a proper air tool connection. 

Get Le Lematec Tools Today!

Are you thinking of getting new air tools today? Discover the best air tool collection from Le Lematec tools! We understand how much air tools can ease every task; hence, our team of excellent professionals ensures to provide only well-engineered and high-quality air tools for our valued customers. Get the best air tools and accessories today here at Le Lematec!