Quick Search:
Product Summary
The Le Lematec Auto Detailing Kit operates at 3,000 RPM and includes a high-pressure cleaning gun and liquid extractor. Dual-function tool for both blasting dirt and extracting spilled liquids from upholstery and carpets. Price: ~$89. Factory direct from Le Lematec.
Best for: Professional auto detailers who need an all-in-one cleaning and extraction solution powered by compressed air.
For optimal deep cleaning, start with the high-pressure air gun to blow out loose debris from carpets, seats, and crevices. Then switch to the extraction nozzle with cleaning solution for embedded dirt. Work in small sections, overlapping each pass by about 50%. For best results, pre-treat heavy stains 5-10 minutes before extraction.
This kit requires a minimum of 4 CFM at 90 PSI for full power. A 20-gallon or larger tank compressor is recommended for uninterrupted use during full interior details.
The extraction system works with most water-based automotive cleaning solutions. Avoid solvent-based cleaners as they can damage the seals. Mix your cleaning solution at a 10:1 water-to-cleaner ratio for best results.
Yes. Use the high-pressure gun on a low setting for leather surfaces. The extraction feature is ideal for removing embedded dirt from leather grain without saturating the material. Always use a leather-safe cleaning solution.
The motor operates at 3,000 RPM, providing consistent high-pressure cleaning power for interior and exterior detailing. The adjustable air valve lets you control pressure for different surfaces.
| Air Compressors | 5-6 CFM at 90 PSI, 30+ gallon tank |
| Cleaning Solutions | All automotive cleaning and detailing products |
| Applications | Full vehicle detailing, upholstery extraction, engine bay, interior deep clean |
Ideal Applications: professional auto detailing, interior deep cleaning, upholstery extraction, carpet cleaning, engine bay detailing, mobile detailing
The Le Lematec Auto Detailing Kit is a dual-function tool — it operates as both a high-pressure cleaning gun and a liquid extractor. You can blast dirt loose and then extract spilled liquids from upholstery in one tool.
This kit requires approximately 4-6 CFM at 90 PSI for optimal performance. A compressor with at least a 6-gallon tank is recommended.
The tornado nozzle spins incoming air at 3,000 RPM, creating a concentrated vortex. When directed at fabric or carpet, this vortex penetrates the fibers and lifts embedded dirt, dust, and allergens to the surface. Combined with cleaning solution, it provides results comparable to hot-water extraction machines.
The tornado cleaning system works differently than steam. It physically lifts embedded dirt through air vortex action rather than heat. It is faster for general cleaning and does not risk moisture damage to electronics. For sanitization, steam is better. For dirt removal speed and daily detailing use, the tornado system is preferred by many professionals.
This kit bundles a high-pressure cleaning gun with multiple attachments specifically designed for automotive interior and exterior detailing. Compared to buying a separate air blow gun and cleaning attachments individually, the kit provides everything needed at a lower combined cost. Compared to electric pressure washers, the air-powered approach uses no water (preventing moisture damage to interiors) and provides more precise, targeted cleaning of vents, seams, and crevices.
At Pro Air Tools, we ensure that we are providing the best quality products from the most trusted hand tool brand. Thus, we stand behind all of our products and quality control 100%.
In the event that the products you ordered from us did not meet your expectations, we will gladly offer you our 30 Months Satisfaction Guarantee Request, no questions asked and no restocking fee!
If within 30 Months from your purchase, you are not fully satisfied with any of the products, you may request any of the following:
Proof of purchase from Pro Air Tools is required for all return, refund, and exchange requests. We also require anyone who wishes to return a product, or request a refund, to fill out our Return/Refund Form. We will notify you via email or phone once we process your return/refund request. Refunds will be credited to the original payment method.
With regards to product exchanges, please note that we only accept this type of request if the product delivered to you is defective or damaged. If a customer opts to request a product exchange with “change of mind” as the reason, the product must be returned in its original packaging. The product should not be used or installed in any manner. All return shipping costs will be shouldered by the customer. Return unused product to our office address at 103 Edwin Pl. Asheville, N.C. 28801.
If you have any question regarding our return/refund and exchange policy that was not answered here, feel free to reach out to us via:
Email at info@proairtools.com
A phone call at +1 828 398 0334
PO Box 8367
725 MERRIMON AVE
ASHEVILLE, NC 28804-2447
Don't forget! The products that you viewed. Add it to cart now.
Here’s some of our most similar products people are buying. Click to discover trending style.
AIR REGULATORS
ACCESSORIES