Quick Search:
The Le Lematec AI303-R1 combines a precision pressure regulator and a 5-micron oil-water separator in one compact aluminum housing. Rated to 140 PSI with 1/4" NPT connections and a built-in analog gauge, it delivers clean, regulated air to HVLP spray guns, plasma cutters, impact wrenches, and any pneumatic tool that depends on dry, pressure-stable air.
| Air compressors | Any compressor up to 140 PSI with a standard 1/4" NPT outlet |
| Air tools | HVLP spray guns, plasma cutters, impact wrenches, ratchets, sanders, nailers |
| Air lines | Standard 1/4" NPT air hoses, quick-connect couplers, manifolds |
| Mounting | Wall, pipe, or compressor outlet — best installed at the point of use to catch in-line condensate |
| Maximum pressure | 140 PSI / 10 Bar |
| Maximum flow | 48 SCFM @ 140 PSI |
| Filter element | 5-micron, reusable |
| Connection | 1/4" NPT (male/female) |
| Housing | Aluminum body, polycarbonate bowl |
| Best applications | HVLP spray, plasma cutting, general workshop air |
Do I need a separate filter if I have the AI303-R1?
No. The AI303-R1 combines filtration and regulation in one unit. The 5-micron element removes water, oil mist, and particulates. For ultra-clean air on spray painting or plasma cutting, add a desiccant dryer downstream — but for typical air tools, this unit is the only conditioning stage you need.
What air compressor do I need to drive it?
Any compressor with a 1/4" NPT outlet rated up to 140 PSI. The regulator handles up to 48 SCFM at maximum pressure, which exceeds the demand of every common single-tool operation. For high-demand tools (sandblasters, large sanders), mount the unit close to the tool to minimize pressure drop.
Can I use this for spray painting?
Yes. The AI303-R1 is widely used by auto painters and refinishers. The filter removes moisture and oil that cause fisheye defects, and the gauge lets you dial in the precise PSI your spray gun needs — typically 25–50 PSI at the gun for HVLP.
Can I wall-mount it?
Yes. The included bracket supports wall or pipe mounting. Mount at the point of use rather than at the compressor — that placement catches the condensate that forms in the air line between compressor and tool.
How do I drain the bowl?
Push the drain valve at the bottom of the bowl. Collected water and oil discharge in seconds. Drain after each session, or daily if the compressor runs heavily — a full bowl will start passing moisture downstream.
When should I choose the AI303-R1 over the AI303-C1 or AI-304?
The AI303-R1 is the only unit in this lineup with an integrated pressure regulator and gauge — choose it when you need to dial in a specific PSI at the tool. Pick the AI303-C1 (1/4" NPT, 150 PSI, filter-only) if you already have a separate regulator. Pick the AI-304 (1/4" NPT, 200 PSI, slim inline filter) when you need the highest-pressure, lowest-profile filtration without regulation.
At Pro Air Tools, we ensure that we are providing the best quality products from the most trusted hand tool brand. Thus, we stand behind all of our products and quality control 100%.
In the event that the products you ordered from us did not meet your expectations, we will gladly offer you our 30 Months Satisfaction Guarantee Request, no questions asked and no restocking fee!
If within 30 Months from your purchase, you are not fully satisfied with any of the products, you may request any of the following:
Proof of purchase from Pro Air Tools is required for all return, refund, and exchange requests. We also require anyone who wishes to return a product, or request a refund, to fill out our Return/Refund Form. We will notify you via email or phone once we process your return/refund request. Refunds will be credited to the original payment method.
With regards to product exchanges, please note that we only accept this type of request if the product delivered to you is defective or damaged. If a customer opts to request a product exchange with “change of mind” as the reason, the product must be returned in its original packaging. The product should not be used or installed in any manner. All return shipping costs will be shouldered by the customer. Return unused product to our office address at 103 Edwin Pl. Asheville, N.C. 28801.
If you have any question regarding our return/refund and exchange policy that was not answered here, feel free to reach out to us via:
Email at sales@proairtools.com
A phone call at +1 828 398 0334
PO Box 8367
725 MERRIMON AVE
ASHEVILLE, NC 28804-2447
Brand-new overstock LE LEMATEC tools at near-cost prices. Same-day shipping. While supplies last.
Don't forget! The products that you viewed. Add it to cart now.
Here’s some of our most similar products people are buying. Click to discover trending style.
AIR REGULATORS
ACCESSORIES