Professional Long Nozzle Attachment - 16.5cm Steel & Aluminum for Precision Blasting

I have a 2018 Subaru WRX that needed valve cleaning, instead of buying a special want for the exact car I bought this universal extension which also works with the grey HF media blaster. This thing worked just fine, it may have taken a little longer to get the hard to reach spots but it obviously did the job. I recommend anyone with the HF blaster, I now use the wand for any other blasting to keep the media away from me, you'll use it for more than just your car.

Works great for my portable blasters. I wish harbor freight sold something like this, instead I had to piece together my own nozzle when I did my carbon cleaning. Will be set for next time though.Only issue mine had is a small burr on the inside of the nozzle but it can be cleaned up in seconds with a drill bit so I’m not docking a star.

Idk what others were having problems with, it’s a tube and it gets into tight areas like for my use carbon cleaning. Works great and works with the cheap harbor freight media blaster. I couldn’t be happier.

Fits harbor freight sand blast kit I used it to walnut blast my n55 e93 335i@TRee_E30_VeRT

Great value for the money easy to work with especially in small crevices

This nozzle works well, especially getting into hard-to-reach areas. Unfortunately, the nozzle itself is made of very soft aluminum. It's not very durable, especially so depending on the blast media that's it's being used with.

I used it for walnut blasting my intake. It worked perfect on my HFT media blaster. I then decided to get cute and start running coal slag and aloxite through it on some other parts after I was done with the intake and it came apart. It's not built for that, a fella should be using an hardened steel or carbide nozzle for that kind of media. My fault. Five stars for this nozzle. Use it for it's intended purpose and it's perfect.

Great!

This made very short work of walnut blasting my intake valves. Fits HF walnut feeder perfectly with an O-ring behind the flange

Haven’t used this yet, but it looks good. Not sure an accessory like that is worth $16, I bet you could find something similar at a local store cheaper, but maybe there’s nothing quite like it out there. My experience with air tools is rather limited at this time.

Worked fine until it broke at the base within the first hour of use.

Does attach to unit

Works great just like described

Many of our projects require surface prep before repainting or waterproofing, this extended nozzle makes it easy to reach between risers or other taller sections without wasting media. Should have purchases this long ago to save time and money. Fast attachment and removal from our tools, means clean up is quick as well.

Was tight & hard to menuever the gun on a couple ports. A few more inches would have been perfect. All said, it works great.

Buena calidad y precio

This long nozzle extension for the sand blaster makes it much easier to focus the power of the sand blaster right where you need it. It is a very good addition to the sand blaster.

You can pun point in tighter areas with this. Works good for what I needed.

This worked perfectly for walnut blasting the valves on my N54 with the Harbor Freight Media Blaster Kit.Good price and fast shipping, no issues or complaints.

Screwed in perfectly to my Le Lematic clone and worked great for some direct injection intake valve cleaning with walnut media. It really helps direct the blast media so you can get things good and clean all the way down near the intake valve seats.

Third time I used it the aluminum great already ate a Way the inside that holds it to the gun

Nozzle was not mounted straight before being permanently affixed. Still works fine just a little awkward. If I mount it with the bend up or down rather than left or right, I dont notice it much. No wasy way to straightenIt without brazing.

Purchased this tip to attach on my harbor freight contained media blaster to carbon clean my vehicles valves. Works great, make sure to have 90+ psi working pressure on the compressors regulator and if it falls below that set psi stop to let pressure build back up. Much faster and easier than the zip tip method.

Made walnut blasting my valves easier to reach.

Out the package didn't really fit, only caught 2 threads with lock ring, wasn't surprised as it's intended for a different unit. Stepped up the hole size a lil and fits perfectly with aid of an o ring for sealing. May change to a copper/brass washer if issues with oring arise. Haven't used yet as I received package few mins before review, but I know it's gonna work.for intake valve walnut blasting and automotive parts reconditioning..

Perfect for small items

Bought this thanks to another gents review. I needed to walnut blast my N54 and this nozzle fit the gun perfect. It is a must have. Also do not get the Fine walnuts....get more coarse. You will need it.

It works great for what I need it to do

Total useless, waste of money.